¶ Anexhub configuration steps
¶ 1.Go to ACE license and check anexhub is enable or not , if its enable then it will show YES, if NO then re register license ones , ones you see hub is enable on this device then only you are able to do anexhub config
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
¶ 2. Take license key and add it on anex hub portal with location if you want go to anexhub portal , click on Device > Add Device > Add license key and select customer , if you add this device is specific zone then select and zone you created , if you select zone or not by default it will add in all zone , then click on add device device will be added in anexhub and anexdns also default do to dashboard and you can check out
go to zone tab and create multi pal zones according to your requirement and while add device select specific zone which you created , if you not select zone it will add in all zone
crating zone : click on zone > go to device zone > write zone name > devices tab should be keep blank and save it zone will create
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
¶ 3.One device is added it will show device on dashboard go to device > ACE device show all device status and details
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
¶ 4.Enable hub in anexgate ACE device config
Enable it with proper anexhub domain ,
Local override option working :
- If you are configuring anexhub first time then add proper domain name of server and select local override no then save config mean initially it will push all local device config to hub server and then next on word if you change any config from hub server and push from hub server it will applicable to ACE device ,
- Selection of local override No means if you change any config in ACE the it will not affect to cloud config , cloud config as its , id you push config from cloud that will applicable to ACE Device
- Selection of local override YES means , you deice config if you want to push to anexhub server , then select local override YES and bellow one button is there is call push local config , if you press that button then your device config will push to anexhub server
- There is one button called Reinitialize AnexHub if you press that button then all anexhub config will be detailed
- Ones you re-initialize hub config then you have to make local override Yes and push you local config ones to HUB server so you will get one unique config ID then , make local override NO and save it , then according to you config you can push and config from HUB server , also you can send previous config means before resent anexhub which config you have in anexhub server that also you can revert its and sent to ACE device
- sync interval indicates after how many time interval ACE shoudl sync with anexgate hub server , it will take in seconds , if we give 300 then every 5 min ACE route will sync with hub server
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
¶ ones you save config go to status > system command > Run ifconfing you will get hub interface
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
¶ then go to system > system command > ping 100.100.0.1 if we are reachable t ping 100.100.0.1 then we can confirm that we are able to reach anexhub server from router
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
go to anexhub tab in ACE and save anexhub config one more time the you will get Cloud Configuration ID and local Configuration ID
in some cases cloud configuration id will not get due to reinitialize anexhub that time we will set local override Yes and save config then click on push local config to HUBserver , that time all local config will be pushed to HUBserver and you will get cloud configuration id, then gain make local override No and save config as its
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
ones you get cloud ID and all detail then we can know that all anexhub config from ace side is done properly then go to anehub portal it will show device is online, sync status and reconfiguration status showing success
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
one you click on device serial number then it will redirect device and show network details also it will show live graph of Band width, latency , system , status
there is one connect button in dashboard if you click on that it will redirect to device directly
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
all config tab there on ACE router same all tab will available in anexhub also , as you configure local device same steps you can do and configured ACE route ( ex you can do network config , firewall config , vpn config ) if you done all config then confirm that your all config is done you want to push this config to hub ace router then click on Publish button , Dont click publish button every changes ones you finish all changes then only you can click publish button ,
if you made any changes in ace config and not clicked publish button in device dashboard Config Status will show Draft
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
ones you published config then on device dashboard Device Sync Status and config status will show pending
ones configuration is applied properly then all status will again shown as success then we can confirm that new made change are applied properly and working
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
if we changed config and that are wrong or if we made such config that we had lost all internet of router this config we first applied on router , and then we are not able to reach internet or config are wrong then ACE device will revert the config with previous working config, and send reverted config status to HUB server and change HUBserver config also as like previous working config
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
in device Dashboard tab called reconfiguration history in that you can see previous config IDs, also you can revert and apply and previous success configuration, in this if config id showing success means this configuration is properly working , if config ID showing Active then we can confirm that this is existing workings config in ACE and HUBserver, if config ID showing failed then we can confirm that this config is not proper or having issue in configuration
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
In Profile > Manage User tab is there, through that we can make multi-pal users for login hub portal
in this we can make 3 types of user super admin, admin, and viewer
super admin : having all access
admin: having all access , but he will not having permeation to create user or change any user details
viewer : this user can only see config and see all report , he will not possible to make any changes and not possible to connect to device
there is one tab called 2 Factor Authentication if we select that, then we do login that time it will get OTP on registered mobile number then we have to add that OTP then only authentication will be success
When creating a user, if we select a specific zone, then only devices in that zone are accessible to that user. if you select zone as all then all device will be accessible to user
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------